The concept of green consumption has now penetrated into every aspect of people's daily life. Among them, the safety of the home environment has attracted more and more people's attention. From formaldehyde, benzene, TVOC, radioactive cesium and other harmful pollutants in decoration, building materials and furniture, All of them are fatal "health killers". The newly-decorated house air pollutants exceed the standard several times and dozens of times, and the case is endless.
Fortunately, in recent years, custom furniture brands have entered the “E0 era†and took the lead in setting up an environmental revolution in the home space.
Solid wood furniture may not be environmentally friendly
The popularity of water-based paints in the field of coatings has greatly reduced the release of harmful materials from wall paints, which has raised the safety of Chinese people's homes. However, due to the high cost and difficult process, this environmentally friendly material has not been widely used in the field of finished furniture.
According to industry estimates, the proportion of domestic furniture water-based paint does not exceed 10%, far lower than the penetration rate of 60% in Europe and America. This also leads to the fact that even if the consumer purchases the whole house solid wood furniture, once the paint used on the surface of the product is not environmentally friendly, it is difficult to prevent the "toxic gas" emitted in the home space.
Environmentally-friendly custom furniture standard
Compared with the difficult reform of environmental protection of finished furniture, custom furniture has taken a big step in the past two years. It is reported that since 2014, the big brands of custom furniture have entered the “E0 eraâ€, including Sophia, Shangpin home allocation, Hao Laike and other well-known brands have taken measures to gradually reduce and eliminate the use of E1 materials, and widely popularize E0 grade plates. , set off an environmental revolution. By 2015, the more well-known custom brands in Guangzhou market will mainly promote E0 products.
It is understood that "E0" is a mark of the formaldehyde release limit grade, which refers to the numerical value of less than 0.5 mg of formaldehyde per liter (E0 ≤ 0.5 mg / l), while the national standard E0 is the release of formaldehyde in China's wood-based panels and their products. The highest standard of the limit.
Understand the national standard, read the formaldehyde limit level
E2≤5.0mg/L
E1≤1.5mg/L
E0≤0.5mg/L
The national standard E0 is the highest standard of formaldehyde emission limit in China's wood-based panels and their products.
Customized environmentally friendly furniture sheet "four look"
As the core material used in custom environmental protection furniture, the plate is the most important part of the custom furniture structure and the most used part. The quality and workmanship of the panel used by the wardrobe manufacturer determines the quality of the overall wardrobe.
1
Different grades, different plates
Judging the quality of custom furniture sheets, it is generally to see the cut surface of the sample. From the cut surface, the blockboard is a two-layer or four-layer veneer (also has a thickened four-layer veneer) close to the solid wood core, and the quality of the blockboard has a flat cut surface without gaps; density The plate is pressed by fine fibers, and the combination is relatively tight and the weight is relatively large; the particleboard is a wooden granular structure, but the combination is not tight enough, the weight is light, and the poor quality can even see small pores; The board is made of a plurality of veneers, generally three or five layers.
2
Look for environmentally friendly plates
Professional custom furniture manufacturers use environmentally-friendly plates that meet national testing standards, while some manufacturers use inferior plates that have no test reports and pose a potential threat to human health. Therefore, to buy custom furniture, we should first look at whether the business has a plate inspection report and relevant testing certificate from the national authoritative inspection department.
3
Plate veneer to see the quality
Some of the wardrobes look good on the surface, but with a light stroke, you can draw obvious scratches - these furniture use styrofoam, ornate paper, and wear resistance is poor.
The reporter investigated some furniture brands in the market and found that the better brand wardrobe will use the environmentally-friendly melamine veneer with thicker immersion paint and high temperature and high pressure treatment, which has high surface strength, abrasion resistance and scratch resistance.
4
Sheet edge sealing to see work
Professional custom furniture manufacturers use precision panel saws to cut sheets without cracking around the sheets. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board.
Xianghe Furniture City official website
Table Top Mini Screen,Table Projector Screen,Portable Screen Outdoor Indoor Screen,Meeting Fast Fold Projector Screen
Dongguan Aoxing Audio Visual Equipment CO.,Ltd , https://www.aoxing-whiteboard.com