Home decoration is naturally inseparable from wood panels, which is better for home decoration panels? The wood supplied on the market is generally formed into a sheet-like material, mainly including: MDF, blockboard, integrated board, particle board, veneer and other various plates. What are the functions of these various names of wood boards in home decoration? ? Please listen to the explanations made by industry experts for us.
Which kind of home decoration plate is good? Expert tips how to choose common decoration plates
1. The medium density board has a poor nail holding force than the particle board
The particleboard is a natural material that is crushed into granules and pressed into a plate. It is the main material of the current cabinet. The MDF is formed by pressing powdered wood chips, and the flatness is good, but the moisture resistance is poor.
In contrast, the nail holding force of the MDF is worse than that of the particle board. If the screw is loose after the screw is tightened, it is difficult to fix because the strength of the MDF is not high, so it is rarely used for the cabinet.
2, blockboard
In the middle of the blockboard is a core made of natural wood strips, with thin veneers on both sides, which is one of the most important materials in the decoration. It can be used for furniture and wooden doors and door covers, heating covers, curtain boxes, etc., and its waterproof performance is good. When selecting, look at its internal wood, it should not be too broken, and the gap between the woods is about 3mm. Due to the unsightly appearance of the wood grain on the surface, it is rarely painted directly, and it is usually attached to the plywood. The woodware used for the furniture and the like must pass through two steps of using the adhesive board and painting, and the cost is higher.
3, facing three plywood: save trouble and cheap
Multi-layer boards, also known as three-ply boards and plywoods, have different layers, and their advantages and disadvantages mainly depend on raw materials. The main use in the home decoration is the veneer plywood, which has already attached a very thin solid wood veneer to the three plywood in the factory. The veneer plywood is easy to use and inexpensive.
4, the integrated board
This is an emerging solid wood material, which is made of high-quality imported large-diameter logs and is intertwined with fingers. Due to the different processes, this board has excellent environmental performance and is 1/8 of the amount of formaldehyde allowed in the blockboard. On the other hand, this kind of plate made of solid wood such as American spruce can be directly painted and painted, which saves a process compared to blockboard.
â—†Expert reminder
The purchase of wood depends first on whether it is environmentally friendly. According to regulations, the formaldehyde emission of indoor building materials must be less than or equal to 1.5 milligrams per liter. If it exceeds 5 milligrams per liter, it is substandard. Secondly, it depends on the moisture content of the wood. When the moisture content of the wood is higher than the equilibrium moisture content of the environment, the wood will shrink and shrink, and vice versa. The main cause of cracking and deformation of wood is that the moisture content is too high or too low. Finally, don't just buy cheap when buying. The materials that are sold at low prices are usually materials that are shoddy and have serious formaldehyde. They should be purchased in the formal market. It is best to buy branded materials.
â—†Selection of sheet
When choosing a blockboard, you must choose the machine board, and do not use the hand board. The mezzanine of the machine blockboard is tightly spliced, the quality is good, there is no gap after the sawing, and the hand-splitting board is not evenly spread after the sawing, the wood is inferior, and the gap is flat compared with the surface of the three-ply panel. No degumming, the grain texture is clear, don't lack corners and ribs. In addition, the five-ply board and the nine-ply board should have a smooth surface, no degumming, uniform thickness, and meet the standard thickness requirements.
Iron Clip Pen ,Ball Pen ,Ballpoint Pen,Waterproof Gel Pen
Tonglu shangmei pen industry co.,ltd , https://www.shangmeipenindustry.com